INSTALLATION & USER MANUAL
9
Solar Smart Operator
Installation and User Manual
Revision 8.12.2015
10
1.
SECONDARY REMOTE STEPS
a. Press and hold
MODE
, release when
PAIR
SET
is displayed and the
S
in
the upper-right corner is flashing.
b. Press
ENTER
. The secondary remote will now be waiting to receive the
transmission from the main remote. It will wait for 30 seconds.
2.
MAIN REMOTE STEPS
a. Press and hold
MODE
, release when
PAIR
SET
is displayed.
b. Press
MODE
twice to move past
RE-ZONE
to display
M
in the upper-right
corner as flashing.
c. Press
ENTER
to begin transmitting the settings to the secondary remote.
d.
SUCC
will be displayed on a successful transfer of settings.
i.
If a
FAIL
message is displayed instead, be sure that the secondary remote is
still configured to be waiting to receive the transmission.
Press
ENTER
to retry.
