26
User guide for IP Weather Station WARIO ME13
Maintain a particular state for a defined time period:
Option to specify the duration of a particular state in seconds, minutes or hours. The
maximum allowed duration is 40 000s, 1080 min or 18 h. Based on this value it is possible to
specify a delay, for example leaving a particular device ON for a defined time period before
turning it off when the condition is fulfilled, or it is also possible to set the opposite, i.e.
a delay in turning on after a condition is fulfilled or not fulfilled.
Action – Email
To
Recipient email address.
Cc
Add Cc recipients.
Subject
Email subject.
Date
Option to select a particular date to be reported along with the current value when
a condition is fulfilled or not fulfilled. These can be freely entered into the email message.
Sensor
Option to select a particular text for a given sensor along with its current value when
a condition is fulfilled or not fulfilled. These can be freely entered into the email message.
Message
Email message.
33
Weather station configuration for Internet display
In order to be able to view the data from the weather station on the Internet using your
computer, tablet or smartphone, it is necessary to configure the access point which will
enable connection with your home network. The exact procedure to follow is dependent
on the particular devices and operating systems you use and so should be performed by
a person with the appropriate skills and knowledge.
If you want to view or share the data from the weather station, it is possible to use the
XML format. The station generates a standardized XML document that can be accessed at
http://<your weather station address>/xml.xml. More information about data communication
with the station including XML or ModBus, is available in a separate user guide at
www.
meteo-pocasi.cz
in the Download section.
It is not recommended to share the data from the weather station at a publicly available link
or a source with higher traffic, or using an iframe. If you want to share the measured values,
use either queries to the server using XML (see above) or set the station to send the XML to
some remote address (see section Synchronization).
You can also easily share your data and weather conditions by registering at
www.meteo-
pocasi.cz
, which will give you access to many additional features such as simple overview
of the weather conditions, possibility to export the measured values into various formats,
option to create a banner for your own weather website, a small application for Windows
that will show you current values etc. If you own more than one weather station, you can
view data from all of them at one place.
All up-to-date manuals and programs are available in the Download section at
www.meteo-
pocasi.cz
.
We wish you nice weather!
