warema_890558_alhb_en_v5•2022-02-01
We reserve the right to carry out improvements
57
If you scroll farther down with the touch wheel, you can select whether the
wind force should also be evaluated in terms of its direction for this channel.
This is useful when all products of this channel are installed with a particular
orientation or in the same compass direction.
Example
You have mounted an articulated arm awning with a preset wind limit value of
8 m/s. If wind comes directly from the west, the awning is more at risk than
if the wind came from the east, in which case the awning would be protected
against the full force of the wind by the building. In this case, you should set
the direction-dependent limit value to 6 m/s for westerly winds and keep the
general limit value of 8 m/s.
Wind monitor ON/OFF
You can activate or deactivate the wind monitor by channel.
CAUTION
However, consider the effects this may have and observe the safety
information in these instructions.
Proceed as follows to activate or deactivate the wind monitor:
Move to the [
Wind control ON/OFF
] line with the touch wheel and press the
touch wheel.
Set or clear the checkmark in the box on the left by turning the func-
tion wheel.
Press the touch wheel to finish the setting.
The first line in the display reminds you that you are performing the settings
for "
Channel 1
".
Press the [
Back
] button to return to the [
Safety functions
] menu.
Channels
