warema_890558_alhb_en_v5•2022-02-01
We reserve the right to carry out improvements
11
2.6 Retrofitting and
modifications
We have designed and built the Wisotronic with reliability and safety in mind.
All required settings are made when the unit is first commissioned. Modifica-
tion of the unit parameters is therefore only required when the characteristics
of the control need to be adjusted, changes are made to the sensor equip-
ment or the control itself is replaced.
WARNING
Retrofitting and modifications may impact the safety of the system or
reduce its effectiveness. Possible consequences may include death,
serious or light injuries, and property or environmental damage.
Therefore, contact us or your specialist dealer before retrofitting or changing
the system or the unit parameters if you cannot find information on the cor-
responding topic in the control unit documentation. This is the only way to
ensure trouble-free retrofitting/modification.
Exercise special care when components of different versions are combined
or when existing components are replaced by older/newer products with a
different scope of functions or a different software version.
2.7 Additional documents
The following documents are available in addition to these instructions:
Document
Number
Wisotronic 1-channel
Operating instructions
890557
Wiring diagrams for MSE, power supply unit and floor distribution
control
816345
Operating and installation instructions of the connected compo-
nents (e.g. weather station)
-
2.8 Basic software
versions
These instructions were created on the basis of the software versions:
Product
Version
Wisotronic control panel
39402108
Wisotronic actuator
39413107
Information on how to identify the software version of your control can be
found in
Chapter 8.6 on page 74
of these instructions.
Safety instructions
