50
Aktionen
To send e-mail messages, access to the mail server must be configured and mail
must be activated as a communication channel. All necessary settings can be made
under
Communication paths » Mail.
In the info area you will find the general access
data for the most common email providers.
SNMP trap
The IP address and host name of the SNMP server as well as the message texts
can be freely configured.
To be able to send SNMP traps you must enable SNMP under
Communication paths
» SNMP
. All other parameters which can be set there are not relevant for sending of
SNMP traps.
MQTT publish
The Web-IO can write any information to an MQTT broker over a configurable path
as an MQTT Topic.
To do this, access to the MQTT Broker must be configured under
Communication
paths » MQTT.
HTTP request
Another possible action is to send an HTTP request, as required by some devices,
such as cameras, to trigger certain functions.
To do this, enter the complete URL with all parameters expected from the receiving
device as the HTTP request.
Format:
http://<Ip/Hostname>/<request>?Parameter1&Parameter2&ParameterN
For those devices that require authentication with username and password, select
which type of authentication should be used and fill in the appropriate fields.
With the request method you have the possibility to send a GET-request or via POST
additional data.
