28
Grundeinstellungen
Pulse mode
By activating the
Pulse Mode
, the output automatically returns to the OFF state after
the selected pulse duration when it is switched to the ON state. When switched
on again during the pulse, the pulse duration starts counting again.
Reset Allowed
specifies that the output may also be switched to the OFF state during a current
pulse.
Date / Time
In the
Date / Time
section you can define whether a periodical adjustment with a
time server should take place. In addition, date and time can also be set manually.
The configuration of a time zone and the daylight saving time can also be done here.
Language / Info
In addition to the language selection German or English, further display elements,
including the logo, can be modified here.
Password
The passwords for administrator and user can be set in this section.
Please note that the same password should not be used for Administrators and
Operators.
If the administrator password is no longer known, physical access to the Web IO is
required to reset the passwords. See the chapter
Emergency Access
in the appendix
of this manual.
