49
Aktionen
Actions
For actions which allow sending alarms, messages and other texts, placeholders
can be used within the text which replace actual contents such as IO states, time
etc. when performing an action.
Placeholder
Description
<ix>
State of the inputs No. x (ON/OFF)
<ox>
State of the outputs No. x (ON/OFF)
<cx>
Counter state No. x
<i>
State of all inputs as hex. bit pattern
<o>
State of all outputs as hex. bit pattern
<dn>
Device name
<inx>
Name of the input No. x
<onx>
Name of the output No. x
<t>
Time stamp with date and time
<$y>
Year in format „YYYY“
<$m>
Month in format „MM“
<$d>
Day in format „DD“
<$h>
Hour in format „hh“
<$i>
Minutes in format “mm“
<$s>
Seconds in format „ss“
For text messages, a clear message can be stored in addition to the actual message
that is sent upon triggering. The clear message is sent when the initiator for the
action is no longer active – i.e. when the normal state returns. Sending messages
takes different amounts of time, depending on the protocol. If the initiating state
is only present for such a short time that the corresponding message could not be
sent, only the clear message is sent.
Email message
The recipient, subject and contents of the email can be freely configured.
