W&H LINA MB17, Instructions For Use Manual

Page: 39 / 76

39
Monthly or 50
Monthly or 50 Monthly or 50
Monthly or 50----cycle maintenance
cycle maintenance cycle maintenance
cycle maintenance
Cleaning the door seal and the chamber face side Cleaning the door seal and the chamber face side Cleaning the door seal and the chamber face side Cleaning the door seal and the chamber face side
Clean the door seal and the outer edge of the chamber with a non-abrasive cloth
moistened with water. If you use a detergent solution, be careful not to get in
contact with the plastic body of the front cover.
Rinse with clean water.
Do not use abrasive products, cutting tools or sharp objects.
Cleaning the chamber and the chamber accessories
Cleaning the chamber and the chamber accessories Cleaning the chamber and the chamber accessories
Cleaning the chamber and the chamber accessories
Remove the trays from the chamber.
Remove the chamber rack and the steam diffuser plate.
Ensure that the steam diffuser plate is correctly placed and engaged, as this is
essential for the sterilization process.
Clean the chamber with a damp sponge and a mild detergent solution paying
attention not to bend or damage the temperature probe inside the sterilizer
chamber. Rinse with water.
Clean the steam diffuser plate, the trays and the tray rack with a damp sponge
and a mild detergent solution. Rinse with water.
Reposition all pieces of the chamber accessories properly.
The trays, the tray holder and the steam diffuser plate may also be cleaned in a
washer disinfector.