34
Manual stop
Manual stop
Manual stop
Manual stop
Press DOWN until YES appears.
While a cycle is in progress, you can abort it manually at any time.
Press UP or DOWN until the STOP option appears preceded by the cursor, then proceed as shown below:
Confirm STOP (OK)
Confirm (OK) YES
Once a cycle is aborted, a reset phase commences to safely release any steam pressure from the
chamber. This may take several minutes. Do not switch off the sterilizer! Wait until the reset phase is
completed.
At this stage you can access some menu items by pressing UP or DOWN.
When selecting the INFO option (see picture) you can view the sterilizer parameters in real time (see previous page).
Before the cycle abortion is confirmed, the abortion procedure
can be interrupted at any time; press BACK several times until
you get to the “cycle in progress” screen and the cycle will go
on as originally programmed.
Summary of Contents for LINA MB17
Page 73: ...Notes Notes Notes Notes...
Page 74: ......
