WP2-8_GB
57 / 189
Copying the settings of the day of the week:
With the use of the P5 (next) or P6 (back) key, set the times, and then go to the
copy
symbol,
press the P4 (SET) key to copy the settings.
By pressing the P6 (back) key to return to the day of the week, and then press the P4 key select
the day for copying the given values.
With the use of the P5 (next) key, go to the
Add
symbol, and then press the P4 (SET) key.
This procedure can be repeated for each day of the week to which the settings have to be
copied.
To exit from the copy function, press the P5 (next) or P6 (back) key, go to the
exit
symbol, and
press the P4 (SET) key again.
Example according to the figure:
The boiler switches on at 6:30 on level 3 (COMFORT).
At 12:00, the boiler switches off, and remains in this status until 17:30.
At 17:30, the boiler switches back on level 1 (ECO).
At 18:00, the boiler changes performance, and switches over to level 2 (NORMAL).
At 18:30, the boiler changes its performance, and switches over to level 3 (COMFORT).
Programming remains ineffective, when the boiler is switched off (OFF) (the LED is ON).
WARNING!
The programming field can be switched on even if the boiler is switched off (OFF);
at this time, the boiler can be controlled with the use of the programming field.
5.3. DISABLING THE AUTOMATED MODE
By default, the fireplace operates in AUTOMATED performance regulation mode.
It means that the control unit adjusts the heating performance of the fireplace automatically to reach the set
temperature. In this case, the difference between the room temperature and the set temperature decides the
optimum performance at which the device needs to operate.
If the AUTOMATED mode is switched OFF, then the user may choose from 5 pre-defined performance grades:
L1
cc. 2–2.3 kW
L2
cc. 4–4.3 kW
L3
cc. 6.5–6.9 kW
L4
cc. 7–7.2 kW
L5
cc. 7.2–7.5 kW
The fireplace continues to operate at the selected performance grade until the temperature of the room reaches the
set value.
After reaching the set temperature, the control unit shifts to a lower heating grade.
To disable the AUTOMATED mode, follow the procedure described below:
First keep the P4 button pressed
