6
2
SEP.QE_SEPCOM_SIP-BED-EASY--.M.A3.0722.EN Issue: A3
07.22
2.0 APPLICATIONS
QE SEPCOM SIP BED EASY
2.1 Safety distances
Danger - Warning
The control panel shall be placed at a safe distance from sources of heat, fuel depots, from flammable
materials, chemicals.
In order to limit potentially dangerous situations, isolate the area surrounding the control panel and
preclude the possibility that unauthorized persons approaches the area.
Although the devices are manufactured in compliance with the regulations on electromagnetic com
-
patibility, it is recommended to NOT install the panel near equipment which represent a sources of
emissions.
Particular attention must be paid during assembly phase of the control panel to avoid the falling external ele-
ments, such as metal shavings or other materials that could damage or block the movement of the electric
components.
Danger - Warning
Incorrect installation and electrical connections can cause serious damage to persons, the equipment,
the electric panel and to plants connected thereto.
Important
The installer must issue a declaration of conformity regarding the installation of the control panel at
the end of the installation operations.
2.2 Emergency stop
Important
The control panel (located to the left) must be equipped with suitable red mushroom-shaped, stay-put
Emergency button to enable the shut-down when completely pushed.
The emergency stop has to be used only in case of danger conditions and therefore the equipment must be
immediately shut down.
Pushing one of the emergency stop buttons causes the hardware cutting of the controls and the flashing of the
red EMERGENCY led.
Prior to restoring of the operation after an emergency stop, it is necessary to:
- Remove the problem that caused the emergency stop.
- Unblock the emergency buttons which are of mechanical hold-in type.
- Push the reset button (STOP CYCLE) and ensure the EMERGENCY indicator light comes off.
- Repeat the start procedure of the machine.