manualshive.com logo in svg

WAMGROUP SEPCOM SIP BED Easy, Assembly And Main Instructions For Use And Maintenance, Page: 23 / 52

Share
Download
WAMGROUP SEPCOM SIP BED Easy Assembly And Main Instructions For Use And Maintenance Download Page 23

20

2

SEP.QE_SEPCOM_SIP-BED-EASY--.M.A3.0722.EN      Issue: A3

07.22

4.0  SETTING THE OPERATING PANEL & USE

QE SEPCOM SIP BED EASY

4.1.3.3 Technician settings

On this page you can act on the parameters that control the operating logics of the pneumatic system, adjust 

the automatic cycle, set the scheduled maintenance, view the version of the software installed, enable/disable 

the “agitator” user, choose between level-based or activation-based operation from external signal, and also 

reset the software to the factory settings. 

no.

Description

Default value

1

Previous page

-

2

Grease nipple operation days / days left before maintenance is required

60 days

3

Separator screen operation hours / hours left before maintenance is required

1000 h

4

SEPCOM separator screen screw operation hours / hours left before mainte-

nance is required

2000 h

Summary of Contents for SEPCOM SIP BED Easy





















































Reviews:

No comments