Overview
8
Waltron User Manual 101-046-B.3
9096 Degassed Cation Conductivity Analyzer
1.2
SAFETY PRECAUTIONS, INSTRUCTIONS, AND HAZARDS
1.2.1
GENERAL INFORMATION
This manual contains important information which is required for installation, start up and
operation of the Waltron 9096 Desgassed Cation Conductivity Analyzer. Please read this manual
carefully before installing and placing the analyzer into service!
Pay attention to all caution and danger labels present on the analyzer and all caution and danger
statements written on this manual.
Waltron shall not be liable for errors contained herein and/or for an incorrect use of the
analyzer. The department head and analyzer’s users must be sure to read and observe the
following instructions and to apply all the national and local regulations and laws
regarding workers health and safety.
Use, maintenance, and service of this analyzer is allowed only by qualified personnel
who are fully trained on the analyzer’s operations. This personnel is intended to be
physically and mentally fit and not under effect of alcohol or/and drugs.
When the analyzer is not used it should be protected from intentional or unintentional
powering on, using a proper circuit breaker.
Failure to do so and non-observance of hazards or dangers warnings could result in death
or serious injury to the operators or damage to the analyzer.
Before using the analyzer, it is necessary to visually check for damages to safety devices
and report to your department head even if they don’t cause the analyzer to stop or
malfunction.
All the analyzer’s components are installed inside a metallic enclosure with a door
equipped with a special key opening, only endowed to qualified maintenance personnel.
