Installation
18
Waltron User Manual 101-046-B.3
9096 Degassed Cation Conductivity Analyzer
3.6
ELECTRICAL CONNECTIONS
General information:
The electrical installation should be carried out by qualified personnel in accordance with
national or local regulations. Qualified Personnel means a person who has been fully
trained and has professional experience to avoid electrical hazards and dangers.
Before servicing the analyzer or its parts that are electrically powered, turn off power to
avoid risks of electrocution.
To turn off power from an electrical device, it is necessary to interrupt the power line
using a circuit breaker or an isolating switch to be sure that there is no power in the area
to be serviced.
Protection against indirect contacts is guaranteed by efficient grounding of all isolated
metal masses.
Users and qualified maintenance personnel must proceed as follows:
Be careful of electrical shock and/or electrocutions labels placed on the analyzer.
Always isolate power before servicing the analyzer.
In case of loss of power, the analyzer stops and automatically restarts into standby mode as soon
as power is restored.
No maintenance should be carried out inside the transmitter
without first switching off the power.
