Installation
14
Waltron User Manual 101-045-E.1
9031CX Sodium Analyzer
2.1.2.1
Mounting dimensions
For ease of mounting, the transmitter is attached to a sheet metal mounting bracket. The entire piece
(transmitter on mounting bracket) can then be wall-mounted. Size and layout of mounting bracket is
shown below.
Figure 5 Dimensions for the transmitter mounting bracket.
2.1.3
SAMPLE REQUIREMENTS
The maximum sample pressures and temperatures specified in the SPECIFICATION section should not
be exceeded. The sample should be introduced to the system at a temperature and pressure suitable for
measurement. If necessary, customer may choose to use sample cooling and pressure reducing
equipment. When pressure reducing equipment is being used, a pressure relief valve should be installed
between the sample point and sample inlet to ensure maximum safety.
