Operating the analyzer
27
Waltron User Manual 101-045-E.1
9031CX Sodium Analyzer
3.3
GETTING STARTED
3.3.1
INITIATING THE ANALYZER
1.
Insert the POWER cord in the AC mains socket terminal connector located in transmitter section and
switch ON the system.
2.
The analyzer automatically displays the concentration of sodium interpreted by the electrodes.
3.
If the analyzer is being started up for the first time, or if it was not in operation for a long time, the
user should perform a calibration as detailed in
Section 3.7.2
.
3.4
SOFTWARE STRUCTURE MAP
