Rev. 1.1
Assembly Instructions - Dosing Valve Station 9741970.0x
Page 6 of 31
Walther Systemtechnik GmbH
– D 76726 Germersheim
Telefon: +49 (0)7274-7022-0 Telefax: +49 (0)7274-7022-91
http://www.walther-2000.de
1.2 Basic Safety Directions
The basic requirements for safe handling and trouble-free operation of this device include:
CAUTION
The device must not be used for purposes other than those intended.
The device must not be modified. In case of modifications, the customer takes
on all responsibility for any incidents due to his modifications. In case a
modification of the device is required, please contact WALTHER
SYSTEMTECHNIK GMBH.
Make sure that the device is always in safe operation condition. Qualified staff
shall perform functional tests and checks for damage at regular intervals.
Authorized staff only shall do disassembly, and according to these assembly
instructions only. To ensure appropriate expertise of the customer´s staff, we
offer training courses upon request.
The customer is responsible for complying with all appropriate safety
measures.
Never operate the device if outlets point towards a person.
Always disconnect device from mains / air pressure supply / grease feed pipe
before beginning any maintenance work. All piping and hoses must be
pressureless.
Check all pipes, hoses and screw connectors for leaks and visible damage at
regular intervals! Immediately remove any damage!
Exposure of the sensors to magnetic fields may cause malfunction of the
sensors.
Ensure that working place, device and environment are kept in clean and
clearly arranged state at regular intervals.
Rules and regulations regarding the prevention of accidents that apply to the
working site must be observed.
1.3 Relevance of Assembly Instructions
The assembly instructions are only referring to the device as stated on the cover sheet of this manual.
The manufacturer of the device accepts responsibility for the safety, reliability and performance of the device
only if the user has read and signed the assembly instructions.
Kindly remember that the assembly instructions were designed for your personal protection and safety.
Reading and understanding the instructions may further help to avoid expensive service work and
inappropriate operation of the device, and hence substantially increase the customer´s benefit.
1.4 Responsibilities of Operating Company and Staff
Reliable and trained staff only should be authorized to work with the device, and responsibilities
should be clearly assigned to individuals.
Maintenance of electrical components of the device must be performed by a professional electrician,
or under supervision of a professional electrician, and according to electro-technical regulations.
Maintenance of hydraulic equipment should be assigned to staff with hydraulics know-how and experi-
ence only!
1.5 Training of Staff
Persons must not work with the device unless they have been respectively trained and made familiar
with the device.
Responsibilities of personnel for assembly work, commissioning, operation, setting up, maintenance,
transport and repair should be clearly assigned to individuals.
Persons in training may work with the device under supervision of an experienced person only.
