![background image](http://html2.mh-extra.com/html/wallas/26cc/26cc_installation-manual_3236326061.webp)
The device does
not start up
(after two
attempts)
The pump does not receive
current pulses.
The red LED on the circuit board
does not blink.
Check the wiring of the pump and
the condition of the overheat
protection.
The pump receives pulses (the
red LED on the circuit board is
blinking), but the piston is not
moving.
(The pump jolts or clicks slightly
when the piston moves.)
Check the pump.
(You can try to start the piston by
carefully striking the side of the
pump. If necessary, replace the
pump.)
The pump receives pulses and
the piston is working but the fuel
in the pipe is not moving.
Check whether the fuel needle or
the filter is clogged.
The connection of the intake
hose to the pump is not entirely
sealed and the pump is sucking
air in.
The pump is worn or dirty and its
pumping power is no longer
sufficient.
The glow plug does not receive
sufficient current.
(The glow plug does not heat up
to a sufficient temperature.)
Low fuel quality.
Change the fuel.
Check the power cord
connections, joints and the main
switch.
Water in the fuel.
Dewater the fuel or replace it.
The combustion air blower
is not working,
or its speed is too low.
Check the combustion air blower.
The flue gas lead-through is
closed.
Water in the flue gas hose.
Open the flue gas lead-through.
Check the bends and loops of the
flue gas hose for water
(water trap).
Add fuel.
The burner is sooty.
The burner must be opened and
cleaned.
LOCKING INDICATION
The fuel has run out or its level is
too low for the intake hose in the
tank to reach it.
Defective glow plug.
FAULT INDICATION WITH
BLINKING LIGHTS
Visual check.
(The glow plug often changes
shape as it breaks)
FAULT INDICATION WITH
BLINKING LIGHTS
2.0.2_GB
Maintenance
en
26CC / 40CC
D80151
- 61 -
490525C
Summary of Contents for 26CC
Page 12: ...12 D80150 Tekniset tiedot Toimintaperiaate fi 26CC 40CC P 12 V 490525C...
Page 40: ...Technical information Operating principles en 26CC 40CC D80151 40 P 12 V 490525C...
Page 68: ...Teknisk information Driftsprinciper sv 26CC 40CC D80152 68 P 12 V 490525C...
Page 96: ...Teknisk informasjon Driftsprinsipper no 26CC 40CC D80158 96 P 12 V 490525C...