manualshive.com logo in svg

WalkAbout Mother Bin, Operator'S & Parts Manual

Share
Download
WalkAbout Mother Bin Operator'S & Parts Manual Download Page 31

27

OPERATION

2

Walkabout Mother Bin Operator Manual

20174000r1 (04-2022)

6.  Remove the wrench (4) from the holder (5) on the vertical auger.

7.  Use the wrench (4) to engage the belt tensioner (6) to start the auger.
8.  If equipped, grain stuck in the bin can be dislodged by the optional vibrator 

system. See the Martin “Cougar” THD Vibrator Operator Manual provided 

for correct instructions to operate the vibrator.

9.  The amount of grain being unloaded or remaining in the bin can be 

monitored three ways:

 

▪

Visually through the windows (7) on the front and rear of the bin.

 

▪

Visually with the optional cameras. See the Users Manual for Dakota 

Micro Inc. provided with the option.

 

▪

By weight with the scale option. See the Operators Manual for TOPCON 

Scale Link Control 2810 provided with the option.

4

5

4

7

6

Summary of Contents for Mother Bin






































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands