Waldorf RN8510GE, Installation And Operation Manual

Page: 13 / 37

11
Installation
Clearances
NOTE: Only non-combustible materials can be used in close proximity to this appliance.
* Side clearances can be 50mm when adjacent surface is at least 100mm below cooking surface.
Assembly
This model is delivered completely assembled. Ensure legs are securely attached.
NOTE:

This appliance is fitted with adjustable feet to
enable it to be positioned securely and level on
uneven floors. This should be carried out on
completion of gas connection. Refer to 'Gas
Connection Section'.

This appliance can also be fitted with rear rollers
to enable appliance to be easily moved for
positioning and cleaning purposes. If desired,
these rollers are supplied in packaging, with
appliance. See below for fitting instructions.
Optional Accessories
(Refer to Replacement Parts List)
 Plinth Kit. For installation details, refer to
instructions supplied with each kit.
Fitting Rear Rollers.
1. Raise appliance from floor by approx. 75mm
using suitable lifting equipment (i.e. Palletiser /
Forklift) to allow rear adjustable feet to be
removed.
2. Unscrew and remove both rear adjustable feet
from rear leg housings.
3. Fit rear roller to rear leg housing and align
screw hole in side of rear leg housing with
threaded hole in rear roller.
4. Secure rear roller to leg support with bolt
supplied and tighten bolt with a 10 mm A/F
spanner.
5. Fit second roller and tighten.
6. Lower appliance back to floor and adjust front
adjustable feet to level appliance.
Fig 1
Appliance
Base
Adjustable
Foot
Rear Roller
Assy
Rear Leg
Housing
Roller
Locating Bolt
Combustible Surface Non Combustible Surface
Left / Right hand side 250mm (*) 0mm
Rear 100mm 0mm