17
Operation
Griddle
Lighting the Griddle
a. Depress gas control knob and rotate anti-clockwise to ‘PILOT’ position.
b. Hold gas control knob depressed, press piezo ignition button to ignite pilot burner. Repeat Items
1 to 2 until pilot is lit.
c. Release gas control knob approximately 10-20 seconds after lighting pilot.
d. Pilot should now remain alight - if not, repeat Steps (b. to (c. above.
e. To select ‘Full Flame’, depress and rotate gas control knob anti-clockwise to ‘HIGH’ position.
f. To select ‘Low Flame’, depress and rotate gas control knob fully anti-clockwise to ‘Low Flame’
position.
g. When main burner is not required, depress and turn gas control knob clockwise back to ‘OFF’
position.
Turning 'OFF' the Griddle Burner / Pilot
a. To turn 'OFF' griddle, but keep pilot burner alight, rotate gas control knob to 'PILOT' position.
Griddle burner will extinguish and pilot will remain alight.
b. To turn 'OFF' 'PILOT', depress and turn gas control knob clockwise back to ‘OFF’ position. 'PILOT'
burner will extinguish.
Ovens
DO NOT USE aluminium foil or trays directly on cast iron sole plate(s).
NEVER block or cover openings on each side of sole plate(s).
1.
Oven is fitted with top and bottom elements. The thermostat maintains oven temperature by
controlling both elements. Top element is further controlled by an energy regulator. Convection
Ovens are fitted with a circulation fan.
2.
Place oven racks in desired position.
3.
Preheat:-
By selecting desired temperature, and turning oven top heat control to a maximum
of 2. When desired temperature is reached, amber neon will go out.
4.
Cooking:- When desired temperature has been reached, turn top element control to ‘OFF’ position.
5.
Top Heat:- To obtain more top heat during cooking, turn top heat control to ‘ON’ position. (The
higher the setting, the more top heat).
6. For Browning:- Turn oven top element control to maximum and oven temperature to a
‘LOW’ setting (about 120°C) or just above 'Light On' position, if previously working at higher
temperatures.
7.
Turning ‘OFF’ the Oven:- Turn oven top heat control to ‘O’ off position. Top heating will be
turned ‘OFF’ and upper heating indicator lamp (Amber) will extinguish.
8.
Turn thermostat control knob to ‘O’ off position and lower heating indicator lamp will extinguish.
The oven is now turned ‘OFF’.
IMPORTANT:
Should any abnormal operation like;
- ignition problems,
- abnormal burner flame,
- burner control problems,
- partial or full loss of burner flame in normal operation, appliance requires IMMEDIATE
service by a qualified service person and should not be used until a service is carried out.
! IMPORTANT
Summary of Contents for RN8510GE
