Setup and Connections
10
Quantum Quickstart
8.
Then switch on your computer (if connected), the
mixing console and finally the amplifier or active
monitor speakers.
r
The startup procedure is about 10-15 seconds. After
this, the Quantum is ready to play.
r
The overall volume of the Quantum can be control-
led with the
Master Volume
dial. This also affects
the
Headphones
output but not the
AUX
output.
r
If you do not choose to connect a mixing console,
you can patch the Quantum’s output signals directly
to an amplifier or an audio interface. Use an input
usually called Line, Aux or Tape input.
r
The Quantum’s audio outputs deliver unbalanced
line levels. When connecting to an amplifier, a mi-
xing console or an audio interface with automatic
balanced/unbalanced sensing inputs, please make
sure to use TS mono jack cables and not TRS stereo
jack cables.
s
Before connecting and disconnecting the Quantum to
a power supply source, turn your amp’s volume con-
trol all the way down to avoid damage due to on/off
switching noise. The Quantum produces a high level
output signal. Please take care that the connected
playback device is suitable for the high level of an
electronic instrument. Never use the microphone or
phono input of the connected amp!
Summary of Contents for QUANTUM
Page 1: ...Quickstart Manual Für deutsche Version bitte umdrehen ...
Page 2: ......
