First Start
17
Quantum Quickstart
•
Some functions can be edited via the touchscreen dis-
play directly. Use your finger to tap on the correspon-
ding parameter/option/button on the touchscreen to
open pop-up menus or sliders which can be moved to
change values or to edit graphics (e.g. envelopes).
•
On most display pages the
Selection
dial can be used
to control the most important parameter – for example
Cutoff 1
on the Dual Analog Filter page.
r
Some parameters can be found on the panel and also
as touchscreen display parameters – for example the
Envelope phases.
All rotary controls consist of endless dials or potentiome-
ters. Turning a dial clockwise increases the corresponding
value; turning it counterclockwise decreases it. Bipolar
parameters (parameters with positive and negative valu-
es) use special gradation when changing their values. As
soon as the value
0
is reached, the sweep is stopped for a
short period to make it easier to edit the Quantum.
r
Some useful hint: Press a button above the display
several times to switch through the corresponding
function tabs.
r
The
Monitor
section in the lower left corner dis-
plays a VU meter unit to show the sound level of the
left/right channels of the main output signal and the
eight played voices. Here you can also see the poly-
phonic workload as well as the used voices for each
Layer with its own color code. Tap on the monitor
section to open a pop-up menu. Here you can choose
other representations of this section. Finally, a
MIDI
Monitor
displays all MIDI messages that Quantum
creates (Internal) as well as incoming MIDI messa-
ges (from MIDI In and the USB ports).
g
Want to start with a clean initialized sound?
By tapping on the
Init
button, you can initialize the
current loaded sound. No sound program is
overwritten during this action. If in Layered mode,
a popup window will open where you can choose, if
the current selected layer (
Current
) or the comple-
te sound program (
Reset
) will be initialized. If
Re-
set
is chosen, the initialized sound programm will
be a single layer program.
Summary of Contents for QUANTUM
Page 1: ...Quickstart Manual Für deutsche Version bitte umdrehen ...
Page 2: ......
