A Short Overview
27
Quantum Quickstart
Komplex Modulator Section
The Komplex Modulator could be described as a complex
LFO with two different curves that can be mixed together,
if desired. The output signal of this section can be used as
modulation source to create morphing atmospheres, dro-
nes, and blurring sounds.
r
To hear result of the Komplex Modulator you should
define it as a modulation source for a desired para-
meter like pitch, filter cutoff frequency, or any other
parameter you like.
The Effects Section
Quantum offers five effect units with a bunch of different
effect types. Two basic parameters of the first three effect
units can be controlled via panel parameters while deeper
editing is done on the Effect display page.
r
Keep in mind that the five effect units provide insert
effects with a serial routing. That means that the si-
gnal will first go through Effect 1, then through Ef-
fect 2 after that, and so on.
How to select an effect?
1)
Tap on the desired Effect tab (Effect 1 to 5) you
wish to use.
2)
Tap on the Effect pop-up menu below the Effect
tab button. Hint: you can skip step 1, because
opening an Effect pop-up menu jumps automati-
cally to the corresponding Effect unit.
3)
Select the desired effect from the effect list.
4)
All effect types can only be used once. This
means, for example, that if you have set up a
Delay for Effect 2 and you also select a Delay for
Effect 4, Effect 2 is set to Off. All parameter edits
made will be adopted. This enables you to per-
form an insert swapping of effects.
5)
After an effect is loaded it can be edited by using
the display page parameters.
Summary of Contents for QUANTUM
Page 1: ...Quickstart Manual Für deutsche Version bitte umdrehen ...
Page 2: ......
