First Start
14
Quantum Quickstart
First Start
Switching On / Off
=
Switch the Quantum on:
•
Press the Power switch
to
switch on the Quantum. The
boot procedure may take a
few seconds. After this, the
display is lit and the Quan-
tum is ready to play.
Master Volume
Use the
Master Volume
to control the Quan-
tum’s overall volume. The volume setting is
global and affects the level of the Main audio
outputs including the Headphones output. The
level of the Aux audio output is not affected.
Compress
A ‘one knob – one function’ tool. Reduces the
dynamic range of the audio signal. The signal
seems to be louder and more assertive. The
compressor effect is positioned after the effect units and
before the
Master Volume
.
r
Keep in mind that the setting of the Compress knob
is not saved within a sound preset.
About the Touchscreen Display
The Touchscreen display gives you an overview of the
actual Mode page, parameter changes, and delivers addi-
tional information. To select a desired function, open a
pop-up menu, or to edit a graphic (e.g. envelopes) just tap
on it and move your finger up and down or from left to
right (and vice versa). The six silver endless dials on the
left and the right side of the display control the correspon-
ding parameter that is shown in the display next to the
dials. The display presentation depends on the selected
mode, but the lower part always shows the same over-
view:
The
Sound Name
section shows the current loaded sound
program. Left to the sound name the program number is
shown. Tap on the program number to select a program by
entering its number.
Summary of Contents for QUANTUM
Page 1: ...Quickstart Manual Für deutsche Version bitte umdrehen ...
Page 2: ......
