First Start
16
Quantum Quickstart
from the left list and add it to the Favorites list on the right
side. You can add sounds to empty slots, replace or remove
sound programs or change their positions (Up & Down).
Tap on
Back
to leave the Favorites page.
The Load mode display page
Editing Program Parameters
In order to change or edit a sound program, you must
access the appropriate parameters. Depending on the type
of parameters, there are different ways to achieve this:
•
The controls on the Quantum’s front panel offer direct
access to the most important sound parameters. The
panel is divided into several sections, each containing
knobs and dials associated with that section. By adju-
sting the controls on the panel you have instant access
to the sound. These parameters are called
Panel Pa-
rameters
. When editing a Panel parameter, this is dis-
played in the lower part of the touchscreen display
(parameter name and corresponding value).
•
Most sections offer additional sound parameters that
are available through the touchscreen display. To edit
an additional parameter, press the corresponding mo-
de button above or below the touchscreen (e.g.
LFOs
)
and use the six display knobs to the left and the right of
the touchscreen display. The touchscreen display page
includes additional parameters that are not accessible
directly via the control elements on the panel. These
parameters are called
Display Menu Parameters
. For
each parameter the original value from a loaded patch
is indicated by a vertical bar in the main bottom area
and in the encoder displays.
Summary of Contents for QUANTUM
Page 1: ...Quickstart Manual Für deutsche Version bitte umdrehen ...
Page 2: ......
