Waldorf KYRA User Manual Download Page 92 | Manualshive

Page: 92 / 165

background image

System Configuration

92

Kyra Manual

r

Bulk send/receive bank

defaults to Off so no Pat-

ches will be overwritten unless you changed this set-
ting since you last powered up Kyra.

Send All Multis

When Send All Multis is activated (using the

Value Up

button),  Kyra  will  immediately  send  all  the  Multis  as  a
SysEx message. Use this feature to back up your Multis to
another Kyra system, a DAW, a generic or custom librarian
or  MIDI  utility.  Note  that  Multis  rely  on  the  Patches  they
reference  -  if  the  required  Patches  are  not  present  at  the
referenced locations the Multi will not sound as intended.

s

Any Kyra that receives these messages will

overwri-

te all its Multis

without warning. If you have multip-

le Kyra units connected, ensure everything is confi-
gured correctly and your Multis are backed up. Unli-
ke Patch Dumps, there’s no Bank setting (as there’s

only one bank of Multis) so the overwrite will

always

occur.

Patch Storage - Copy Patch Bank

The  Copy  Patch  Bank  feature  allows  you  to  copy  whole
banks of Patches between any of Kyra’s 26 memory banks.
Recall  each  Bank  comprises  128  Patches.  You  can  copy
between  any  two  banks  regardless  of  whether  they  are
RAM Banks or ROM Banks.

s

Ensure the selected Copy to Bank does not have any

Patches you want to keep (or is backed up) before ac-
tivating the copy as the entire Bank will be overwrit-
ten.

The procedure to copy Patch Banks is:

1.

Locate the Copy Patch Bank page in the System
Edit pages.

2.

Set the Bank you wish to copy from in "Copy from
Bank". Any Bank can be selected.

3.

Set the Bank you wish to copy to in the "Copy to

Bank". Again, it can be any of the Banks from

«
...
90
91
92
93
94
...
»

Summary of Contents for KYRA






































































































































































Reviews:

No comments

Related manuals for KYRA

Brand: GameChanger Pages: 14

Brand: Mordax Pages: 23

S03 voice editor

Brand: Yamaha Pages: 28

Sonogenic SHS-500

Brand: Yamaha Pages: 44

Brand: Yamaha Pages: 16

Brand: Yamaha Pages: 8

Brand: Yamaha Pages: 39

entity BASS DRUM

Brand: SSF Pages: 2

Brand: Kiwi Technics Pages: 60

Brand: Kiwi Technics Pages: 66

Brand: Korg Pages: 5

Brand: Korg Pages: 5

Kaossilator Dynamic Phrase Synthesizer

Brand: Korg Pages: 4

Brand: Korg Pages: 4

Brand: Korg Pages: 5

Brand: Korg Pages: 8

Brand: Korg Pages: 16

Brand: Korg Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands