The Control Panel Sections
38
Kyra Manual
Wave Group & Wave Number
The Wavetable Navigator for the Oscillator Group can be
accessed by pressing the Oscillator Group 1
Select
button
until the navigator is shown (three times from the Home
page). Use the Wavetable Navigator to select the wavetable
required for Oscillator Group 1. The 4096 tables are
grouped by genre to make selection easier. For your refe-
rence, the page also shows the waveform of the wavetable
selected.
r
Hypersaw controls are effective only if the voice is
configured for Hypersaw Mode.
Hypersaw Intensity
The
Hypersaw Intensity
control sets the intensity of the
Hypersaw. The algorithm operates by rolling off the hyper-
saw partials as they deviate from the root frequency. The
intensity control sets the rate of that rolloff. Higher set-
tings result in a stronger presence of more partials yiel-
ding a more intense hypersaw.
Hypersaw Spread
The
Hypersaw Spread
control sets the spread of the Hy-
persaw. The algorithm operates by deviating (detuning)
the frequency of the hypersaw partials from the funda-
mental note. The spread control sets the amount of devia-
tion between the partials. Note that Hypersaw Spread is a
Mod Matrix destination and can therefore be modified by
any modulation source. This is a very effective technique.
Hypersaw Sub Oscillator
When switched on, the two partials furthest from the fun-
damental are played one octave lower. This gives the hy-
persaw sound extra bass presence. There is no physical
control for the Hypersaw Sub Oscillator.
Summary of Contents for KYRA
Page 1: ...USER MANUAL ...
