The Control Panel Sections
49
Waldorf Kyra
Envelope Generator Controls
Overview
Kyra provides three Envelope Generators (EGs).
•
EG1 is dedicated to modulating the Amplifier.
•
EG2 is dedicated to modulating the Filter
•
EG3 is available for general modulation
All the Envelope Generator pages are part of the EG page
sequence which is described in this section.
Amp & Aux EG Select Buttons
The
Amp
and
Aux
EG
Select
buttons select which EG is
configured by the four controls to the right of the buttons.
The buttons are also useful for navigating to all three EG
pages to inspect the parameter values.
r
Use the
EG Amp
and
EG Aux
buttons to navigate to
all three EGs easily. To select EG2 just press
EG Amp
select button twice.
Attack
The Attack setting determines the attack rate for the
selected EG. This is amount of time it takes for the EG
output to go from zero to maximum level.
Decay
The Decay setting determines the decay rate for the
selected envelope generator. This is the amount of time it
takes for the EG output to drop from maximum level to
reach the Sustain level.
Sustain
The Sustain setting determines the sustain level of the
selected EG. This level is held so long as the note is held.
Release
The Release setting determines the release rate for the
selected EG. This is the amount of time it takes for the EG
output to go from the sustain level to zero after the note is
released.
Summary of Contents for KYRA
Page 1: ...USER MANUAL ...