The Control Panel Sections
47
Waldorf Kyra
Filter Type
r
Please see the description of the
Filter Type
but-
tons.
Filter Cutoff Frequency
r
Please see the description of the
Filter Frequency
control.
Filter Resonance
r
Please see the description of the
Filter Resonance
control.
EG1 to Cutoff Frequency
This parameter has no physical control and is only availab-
le in the corresponding Filter page. This control is identical
to the
EG2 to Cutoff Frequency
control (which does have
a physical control) but uses EG1 as the modulation source
rather than EG2.
EG2 to Cutoff Frequency
r
Please see the description of the
EG2 to Frequency
control.
LFO2 to Cutoff Frequency
r
You can adjust the
LFO2 to Cutoff Frequency
set-
ting using the
EG2 to Frequency
control with Shift
Mode engaged.
The
LFO2 to Cutoff Frequency
setting determines the
amount that LFO2 modulates the current filter cutoff fre-
quency. LFO modulation is positive bipolar only. If negati-
ve LFO modulation is required, use an anti-phase LFO or
Mod Matrix routing. If unipolar modulation is required, use
a Mod Matrix routing.
LFO3 to Cutoff Frequency
This parameter has no physical control and is only availab-
le in the corresponding Filter page. This control is identical
to the
LFO2 to Cutoff Frequency
control (which does
have a physical control) but uses LFO3 as the modulation
source rather than LFO2.
r
With so many hardwired filter modulations availab-
le, you won’t need to use valuable Mod Matrix slots
for the majority of routine filter modulation tasks.
Summary of Contents for KYRA
Page 1: ...USER MANUAL ...
