The Control Panel Sections
30
Kyra Manual
Voice Control Pages and Parameters
The Voice Control Pages can be accessed by pressing the
Patch Edit
button. The first of the three Voice Control
pages is shown below:
Patch Volume
r
You can adjust the Patch Volume setting using the
Master Volume
control with Shift Mode engaged.
Use Patch Volume to match the relative levels of patches.
You can automate the Patch Final Level parameter using
MIDI CC messages or the Mod Matrix for smooth fade
ins/fade outs.
Voice Mode
r
Please see the descriptions of the voice mode but-
tons (
Wave Mode
and
Hypersaw Mode
).
Dual Mode
r
Please see the description of the
Dual Mode
button.
Panorama
r
You can adjust
Panorama
using the
Portamento
control with Shift Mode engaged.
The Panorama setting controls how far from centre the
two voices of a Dual Mode Patch are spread apart. In Dual
Mode, the two voices will be panned apart around the
point configured in by the
Patch Pan
control. The width of
that panning is set by the
Panorama
control. At zero, the
Dual Mode sound will be based around a single point in the
stereo stage. At maximum setting (the default) the two
voices will be panned in opposing positions to achieve
maximum stereo width. Keep this at a high setting unless
you need to specifically limit the width of a Dual Mode
Patch. If you need to limit it significantly it might be worth
reviewing if the Patch needs to be in Dual Mode at all. At
zero setting, there is no stereo imaging and the rich stereo
width, which is the primary benefit of Dual Mode, will be
absent. Note that the
Panorama
control is applied before
any effects so narrowing the width does not narrow the
stereo effects subsequently applied to the Patch. When
Summary of Contents for KYRA
Page 1: ...USER MANUAL ...
