154 Commissioning
Touch Panel Standard Line
762-4xxx TP 600
Manual
Version 1.3.0
8.7.2
“Information” Tab
8.7.2.1 “Device Status” Page
The following tables explain the parameters listed on this page.
8.7.2.1.1 “Device Details” Group
The panel properties are displayed in this group.
Table 125: WBM “Information” Page – “Device Details” Group
Parameter
Explanation
Product Description
Panel description
Order Number
Panel item number
Serial
Unique product serial number
License Information
Notification that the CODESYS runtime system is
available
Firmware Revision
Firmware version
8.7.2.1.2 “Network Details X1/X2” Group
The network and interface properties are displayed in this group.
Table 126: WBM “Information” Page – “Network Details X1/X2” Group(s)
Parameter
Explanation
State
Status of the X1 or X2 ETHERNET interface
(enabled/disabled)
Mac Address
MAC address used for panel identification and
addressing
IP Address
Current IP address of the panel
IP Source
Current reference type of the IP address
Subnet Mask
Current subnet mask of the panel
8.7.2.1.3 “Operating Hours” Group
The panel’s total hours of operation are indicated in this group in the format
“days, hours, minutes.”
8.7.2.2 “Vendor Information” Page
You can find the manufacturer and address on the “Vendor Information” page.
8.7.2.3 “PLC Runtime Information” Page
Information about the enabled runtime system and PLC program created in the
programming software is provided on the “PLC Runtime Information” page. In
addition, here you can find a link to open the WebVisu.
