WAGO Standard TP 600 762-4 Series Page 96 Manual Download

Page: 96 / 212

96 Commissioning

Touch Panel Standard Line

762-4xxx TP 600

Manual

Version 1.3.0

8.6.1.7.3 “DNS Server” Group

Table 59: WBM “TCP/IP Configuration” Page – “DNS Server” Group

Parameters

Explanation

Configured: None/

DNS Server n

The addresses of the defined DNS servers are

displayed. If no server has been defined,

“Configured: None” is displayed.

New Server IP

Add additional DNS addresses.

You can enter 10 addresses.

Additionally used

(assigned by DHCP)

The DNS servers assigned if necessary by DHCP

(or BootP) are displayed. If no DNS server has been

assigned by DHCP (or BootP), “none” is displayed.

Click

[Delete]

to remove the selected DNS server. The change is effective

immediately.

Click

[Add]

to add the entered DNS server. The change is effective immediately.

Summary of Contents for Standard TP 600 762-4 Series





















































































































































































































Search results

Summary of Contents for Standard TP 600 762-4 Series

Reviews:

Related manuals for Standard TP 600 762-4 Series

Brands by name

Popular brands

WAGO Standard TP 600 762-4 Series, Manual

Search results

Summary of Contents for Standard TP 600 762-4 Series

Reviews:

Related manuals for Standard TP 600 762-4 Series

Brands by name

Popular brands