WAGO Standard TP 600 762-4 Series Manual Download

Page: 133 / 212

Touch Panel Standard Line

Commissioning 133

762-4xxx TP 600

Manual

Version 1.3.0

8.6.1.31 “Modbus Services Configuration” Page

The settings for various Modbus services are shown on the “Modbus Services

Configuration” page. The groups are only visible if the

RUNTIME

system is

enabled. Otherwise an information text is displayed.

8.6.1.31.1 “Modbus TCP” Group

Table 102: WBM “Modbus Services Configuration” Page – “Modbus TCP” Group

Parameter

Explanation

Service active

Disable or enable the Modbus/TCP service here.

Click the

[Submit]

button to apply the changes. The change is effective

immediately.

8.6.1.31.2 “Modbus UDP” Group

Table 103: WBM “Modbus Configuration Services” Page – “Modbus UDP” Group

Parameter

Explanation

Service active

Disable/enable the Modbus-UDP service here.

Click the

[Submit]

button to apply the changes. The change is effective

immediately.

Summary of Contents for Standard TP 600 762-4 Series





















































































































































































































Search results

Summary of Contents for Standard TP 600 762-4 Series

Reviews:

Related manuals for Standard TP 600 762-4 Series

Brands by name

Popular brands

WAGO Standard TP 600 762-4 Series, Manual

Search results

Summary of Contents for Standard TP 600 762-4 Series

Reviews:

Related manuals for Standard TP 600 762-4 Series

Brands by name

Popular brands