34
Connecting Data and Supply Cables
WAGO-SPEEDWAY 767
767-9101 Power Divider, 24 VDC
Manual
Version 3.0.0
•
For transmission of the power supply, use only pre-assembled WAGO
power supply cables, so the specified characteristics of the technical data
can be achieved.
Pos: 23.10 /Serie 767 ( WAGO-SPEED WAY)/Anschluss D aten- und Versorgungskabel/I/O-M odule/Anschluss_Hi nweise Teil 3.1 @ 8\mod_1278314911479_21.docx @ 58959 @ @ 1
•
Observe the exact positioning (coding) between plug and socket.
•
Keep all cables a sufficient distance away from electromagnetic sources of
interference in order to maintain a high level of interference resistance of
the 767 system against electromagnetic emissions.
•
Observe the minimum bending radiuses of the WAGO system cable. For
more information, see the technical data at www.wago.com.
•
When laying all cable, ensure that you do not lay it in shear areas of moving
machine parts.
•
Observe the correct layout of the potential equalization.
Pos: 23.11 /Serie 767 ( WAGO-SPEED WAY)/Anschluss D aten- und Versorgungskabel/I/O-M odule/Anschluss_Z ubehör 767- 9101 @ 7\mod_1267769677566_21.docx @ 51753 @ 2 @ 1
5.2
Required Accessories
The WAGO accessories listed below are required for connecting the supply cable.
The associated item numbers can also be found in the fieldbus manuals for 767
Series, in the "Accessories" section. Select the manual appropriate to the 767
Series fieldbus you are using.
•
Supply cable with M12 connectors, IP 67, pre-assembled on both ends
•
M23 connectors
Pos: 23.12 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1
