WAGO-SPEEDWAY 767
Connecting Data and Supply Cables
37
767-9101 Power Divider, 24 VDC
Manual
Version 3.0.0
Pos: 23.19 /Serie 767 ( WAGO-SPEED WAY)/Anschluss D aten- und Versorgungskabel/I/O-M odule/Anschluss_M 12- Versorgungsleitung en 767-9101_2 @ 8\mod_1278313777370_21.docx @ 58955 @ @ 1
To connect the supply cable to the module and 767 Series components, proceed as
follows:
1. Disconnect the power supply from those devices on which you have
mounted the module.
2. Connect the M23 supply cable to the module by plugging the supply cable's
socket into the "IN" port (6).
3. Tighten the socket using the knurled-head screws.
4.
Connect the M12 supply transmission cable (K1) to one of the supply
outputs (1) on the module and to the "IN" port (5) on a 767 Series
component. For example, use the module to supply power to a group
consisting of two I/O modules. Then connect the power supply cables (K1,
K2) to the associated inputs and outputs, as shown in the following figure.
5. Attach the sockets and plugs of the cables and tighten them using the
knurled-head screws.
6.
Screw a protective cap on all unused ports to ensure that IP 67 degree of
protection is provided.
Figure 14: Supply cable connected to module and I/O modules
Pos: 24 /D okumentation allgemei n/Glieder ungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1
6
5
1
