WAGO-SPEEDWAY 767
Service
41
767-9101 Power Divider, 24 VDC
Manual
Version 3.0.0
Pos: 39 /Serie 767 ( WAGO-SPEED WAY)/Ser vice/I/O-M odule/Ser vice 767- xxxx allgemein 2.2 @ 8\mod_1278649957222_21.docx @ 59430 @ 3 @ 1
8.1.2
Removing the Module from Your System
To remove the module from your system's framework, proceed as follows:
1. Disconnect the power supply from those devices on which you have
mounted the module.
2. Release the module from your system by unscrewing the M4 screws.
Pos: 40 /Serie 767 ( WAGO-SPEED WAY)/Ser vice/I/O-M odule/Ser vice 767- xxxx allgemein 3 @ 5\mod_1249469687968_21.docx @ 40445 @ 3 @ 1
8.1.3
Removing the Module from the Carrier Rail
In order to keep the representation unambiguous, the carrier rail adapter in the
following figure (B, C) is shown without module.
If the module is mounted on a carrier rail, proceed with the removal as follows:
1. Disconnect the power supply from those devices on which you have
mounted the module.
2. To remove the module, press down the release actuator of the carrier rail
adapter using a slot screwdriver (B) and remove it from the carrier rail (C).
Pos: 41 /Serie 767 ( WAGO-SPEED WAY)/Ser vice/I/O-M odule/Ser vice 767-9101 - Bild @ 7\mod_1267790967464_21.docx @ 51804 @ @ 1
Figure 16: Removing the module (with the carrier rail adapter) from the carrier rail
Pos: 42 /D okumentation allgemei n/Glieder ungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1
A
B
C
