12
Important Notes
WAGO-SPEEDWAY 767
767-9101 Power Divider, 24 VDC
Manual
Version 3.0.0
•
The operating instructions for the 767 Series module and the system
description must be laid out ready on site.
•
Observe the exact positioning (coding) between plug and socket.
•
The 767 Series device shall not come into contact with substances having
seeping and insulating properties. Otherwise, additional measures shall be
taken for the device, such as installation of an enclosure that is resistant to
the above-mentioned substance properties.
•
Electronic components fulfilling the ESD requirements according to the IEC
61000-6-2 are integrated in the 767 device. As higher voltages may occur,
under unfavorable circumstances, due to electrical charge in the field,
discharge must be ensured before performing work on the 767 system.
•
Ensure that the potential equalization is correctly laid out.
Pos: 16.19 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/I/O-Modul /Sicher hei tshi nweise 767- xxxx_767- 9101 --> nach 767- xxxx_2 einfügen @ 7\mod_1267623180561_21.docx @ 51659 @ @ 1
•
For transmission of the power supply, use only pre-assembled WAGO
power supply cables, so the specified characteristics of the technical data
can be achieved.
•
The cable for the power supply infeed must be self-assembled. This requires
an M23 connector with the IP 67 degree of protection. This can be obtained
from WAGO. Use power supply cable with a maximum cross section of 2.5
mm².
Pos: 16.20 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/I/O-Modul /Sicher hei tshi nweise 767- xxxx_4 @ 7\mod_1267623157545_21.docx @ 51662 @ @ 1
•
Replace defective or damaged modules (e.g., deformed connections), else
function disruptions can occur in the respective fieldbus stations or nodes.
•
When laying any cables, make sure that you do not lay them within the
shear range of movable machine parts.
•
For each activity, observe the corresponding personnel qualification in the
corresponding Section.
•
Observe the marking on the front and rear side of the module.
Pos: 16.21 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/I/O-Modul /Sicher hei tsei nrichtungen 767- xxxx @ 7\mod_1268142379773_21.docx @ 52055 @ 2 @ 1
2.3
Safety Equipment
All 767 Series products are designed to meet the requirements of IP67. This
includes complete protection against accidental contact with electrical voltage and
currents – even when wet.
Pos: 16.22 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1
