765-1202/0100-0000
Provisions
Product manual | Version: 1.0.0
7
16DIO FLD EC DC 24V 2.0A
1
Provisions
This documentation applies to the following product:
Table 1: Scope of Applicability
Item no.
Item description, long
Item description, short
0765-1202/0100-0000
16-channel digital input/output; EtherCAT;
24 V DC; 2.0 A; 8 × M12 connector
16 DIO FLD EC 24 VDC 2.0 A
1.1 Document Portfolio
Note
Observe the applicable documentation!
This product must only be installed and operated according to the instructions of the com-
plete Instructions for use. Knowledge of the complete Instructions for use is required for
proper use.
1. Carefully read the Product Manual.
2. Before commissioning, follow the instructions in section
8
.
Table 2: Complete instructions for use
Document Type
Contents
&
Product Manual
Contains all the product-specific information for a product.
&
Data Sheet
Contains the technical data and approvals / certificates for a product.
&
Instruction leaflet
Is included with each product. Contains initial information on safe handling of
the product.
All documentation is available at:
ü
/<item number>.
Besides this documentation, the following supplementary document is available:
•
&
Product Manual
WAGO IO-Link Configurator
1.2 Intended Use
The product 0765-1202/0100-0000 is used to capture and output digital field signals, e.g.,
from sensors and actuators, which have been sent or received by a higher-level con-
troller.
The product works as a decentralized input/output unit in EtherCAT networks.
• This product is intended for installation in automation technology systems.
• The product meets the IP67 protection type requirements.
• The product is intended for indoor and outdoor use.
• Operation of the products in Industrial area is permitted.
• Operation of the product in other application areas is only permitted when correspond-
ing approvals and labeling are present.
Improper Use
Improper use of the product is not permitted. The following cases in particular constitute
improper use:
