WAGO 765-1202/0100-0000, Product Manual

Page: 54 / 100

765-1202/0100-0000 Commissioning
54 Product manual | Version: 1.0.0
16DIO FLD EC DC 24V 2.0A
ð
The IP address has been set.
10.2 Configuration
10.2.1 Configuring EtherCAT
To configure the EtherCAT
®
master, you need the ESI (EtherCAT
®
Slave Information)
files in XML format:
WAGO_series765.xml and WAGO_series765_diag.xml
The file WAGO_series765.xml contains a reference to the file WAGO_se-
ries765_diag.xml , which contains diagnostic texts. Perform the following steps in the con-
figuration software of the EtherCAT
®
master used:
• Import the XML files.
• Select the module from the device catalog.
• Set the parameters.
10.2.1.1 Selecting the Module
Select the module used from the device catalog.
Module: 0765-1202/0100-0000
Designation:16 DIO FLD EC 24 VDC 2.0 A
10.2.1.2 Setting Parameters
You can set the parameters for the module in the configuration software of the EtherCAT
®
master. The existing parameters contain the basic settings for the module, which you can
adapt to your application. Set the module and port parameters in the start-up parameters
in the configuration software of the EtherCAT
®
master. The EtherCAT
®
master sends
these parameters to the module when communication starts up.
You can find all the module parameters in 8 Module Parameters [ } 39] .
10.3 Parameterization
The following tools are described below:
• WAGO Webserver I/O Field
• WAGO I/O Field app
• OPC UA Server
10.3.1 WAGO Webserver I/O Field
10.3.1.1 Call WAGO Webserver I/O Field
This section describes how you can use the integrated software WAGO I/O Field Web-
server to get access to detailed information on the current operating state of the product
and make settings to affect the product’s behavior.
ü Requirement: Opening the user interface of WAGO I/O Field Webserver requires that
product’s IP address is configured and known.