WAGO-TO-PASS® 761
Operation
91
761-214 Telecontrol Module Compact, 8 AI, ESP, DSP
Manual
Version 2.0.0
8.4
Switching to Standby
Standby authorization
Switching standby on and off is only possible by subscribers whose telephone
number has been entered in the address list!
Using the "Standby" function, it is optional to change all messages sent by the
TO-PASS
®
telecontrol modules specifically to the respective ready state. This
takes place with simple changeover via SMS.
To do this, just send an SMS with the text "Standby1" to the
TO-PASS
®
telecontrol modules. The
TO-PASS
®
telecontrol module then transmits all alarm
messages to the SMS sender. Other receivers defined in the
TO-PASS
®
telecontrol
modules are no longer informed.
To switch this function off, send an SMS with the text "Standby0" to the
TO-
PASS
®
telecontrol modules.
The
TO-PASS
®
telecontrol module sends the SMS “STANDBY OK!” at the start
of the standby function and the “STANDBY END!” at the end of the standby
function.