64
Parameterizing
WAGO-TO-PASS® 761
761-214 Telecontrol Module Compact, 8 AI, ESP, DSP
Manual
Version 2.0.0
Table 30: Configuring the analog inputs
Alarm settings
First value
In this field enter the first limit for which a message is to be
sent when this limit is violated (upper/lower limit) (see
below).
Use the buttons to select whether the message is to be sent for
violation of the upper [
increasing]
or lower limit value
[
decreasing]
.
Message
In this field enter the text to be contained in the message
transmitted when the analog value has violated the first
(upper/lower) limit.
Address
Use these buttons to select the addresses to which the
message is to be transmitted when the analog value has
violated the first limit.
Click the button
[Internet]
for applications with GPRS
transmission.
Analog value
Use these buttons to select up to four analog values which
can also be transmitted with the message when the analog
value has violated the first (upper/lower) limit.
Second value
In this field enter the second limit for which a message is to
be sent when this limit is violated (upper/lower limit) (see
below).
Use these buttons to select whether the message is to be sent
for violation of the upper [
increasing]
or lower limit value
[
decreasing]
.
Message
In this field enter the text to be contained in the message
transmitted when the analog value has violated the second
(upper/lower) limit.
Address
Use this button to select the addresses to which the message
is to be transmitted when the analog value has violated the
second (upper/lower) limit.
Click the button
[Internet]
for applications with GPRS
transmission.
Analog value
Use these buttons to select up to four analog values which
can also be transmitted with the message when the analog
value has violated the second (upper/lower) limit.
