88
Operation
WAGO-TO-PASS® 761
761-214 Telecontrol Module Compact, 8 AI, ESP, DSP
Manual
Version 2.0.0
8.2.2.1
Inputs/Outputs
Press the
[I/O]
button to display the process values of the inputs and outputs. The
process values displayed are valid if the on-line display is green.
Figure 36: Visualization of the process values
Process values pertaining to inputs are displayed in the upper portion of the
window and those pertaining to digital and analog outputs are displayed in the
lower portion of the window.
Digital inputs configured as counter inputs are highlighted in blue.
Displaying the Analog Values
The process values of the analog inputs and outputs are displayed with 8-bit
resolution.
You can set or reset the digital outputs by pressing the
[Set/Reset]
buttons.
To set an analog output, enter the required numerical value in the corresponding
input field and then click the associated button
[Set]
.
