WAGO-TO-PASS® 761
Parameterizing
67
761-214 Telecontrol Module Compact, 8 AI, ESP, DSP
Manual
Version 2.0.0
Evaluation of places after the decimal point
Starting with Firmware 02.33.08, places after the decimal point are also taken into
account for switching of the analog outputs. A period (decimal point) "." must be
used as the separator. Up to four digits are evaluated. With a minimum value of 0
and a max. value of 20, two digits can be used after the decimal point, allowing a
value of "5.55" to be evaluated, for example. Configuring is performed without
places after the decimal point.
