Power Supply
•
31
System Supply
WAGO-I/O-SYSTEM 750
BACnet/IP Controller
2.7.2 System
Supply
2.7.2.1 Connection
The WAGO-I/O-SYSTEM 750 requires a 24 V direct current system supply
(-15 % or +20 %). The power supply is provided via the coupler/controller
and, if necessary, in addition via the internal system supply modules
(750-613). The voltage supply is reverse voltage protected.
Attention
The use of an incorrect supply voltage or frequency can cause severe damage
to the component.
Fig. 2-11: System Supply
g0xxx02e
The direct current supplies all internal system components, e.g. cou-
pler/controller electronics, field bus interface and bus modules via the internal
bus (5 V system voltage). The 5
V system voltage is electrically connected to
the 24 V system supply.
Fig. 2-12: System Voltage
g0xxx06e
