WAGO 750-404/040-003 Manual Download Page 68

Page: 68 / 70

68 List of Tables

WAGO-I/O-SYSTEM 750 XTR

750-404/040-003 Counter Adjust XTR

Manual

Version 1.1.0

List of Tables

Table 1: Number Notation ................................................................................... 7

Table 2: Font Conventions .................................................................................. 7

Table 3: Overview of Functions (Operating Modes) ............................................16

Table 4: Legend for Figure “View” ......................................................................18

Table 5: Legend for Figure “Power Jumper Contacts” ........................................20

Table 6: Legend for Figure “CAGE CLAMP

Connectors” ..................................22

Table 7: Legend for Figure “Display Elements”...................................................23

Table 8: Technical Data – Device .......................................................................25

Table 9: Technical Data – Power Supply ............................................................25

Table 10: Technical Data – Communication .......................................................25

Table 11: Technical Data – Switching Frequency, Data Width, Counter

Depth ........................................................................................................26

Table 12: Technical Data - Operating Mode “Frequency Counter”......................26

Table 13: Technical Data - Operating Modes “Up/Down Counter,” Up

Counter” and “Peak Time Counter” ...........................................................26

Table 14: Technical Data - Operating Mode “2 Up Counter” ...............................26

Table 15: Technical Data – Field Wiring .............................................................27

Table 16: Technical Data – Power Jumper Contacts ..........................................27

Table 17: Technical Data – Data Contacts .........................................................27

Table 18: Technical Data – Mechanical Conditions ............................................27

Table 19: Technical Data ‒ Climatic Environmental Conditions

..........................27

Table 20: Standards and Rated Conditions for Explosion Protection

Applications...............................................................................................29

Table 21: Climatic and Mechanical Environmental Conditions and

Shipbuilding ..............................................................................................30

Table 22: EMC – Immunity to Interference .........................................................31

Table 23: EMC – Emission of Interference .........................................................33

Table 24: WAGO Power Supplies for Field Supply in Marine Applications .........34

Table 25: Standards and Rated Conditions for Rail Applications (EN 50155) .....35

Table 26: Overview of Input and Output Data .....................................................37

Table 27: Overview of the Input and Output Data in Operating Modes “Up

Counter,” Up/Down Counter” and “Peak Time Counter” ............................39

Table 28: Overview of Input and Output Data for Operating Mode “2 Up

Counter” ....................................................................................................41

Table 29: Description of Marking Example According to ATEX and IECEx .........58

Table 30: Description of Marking Example for Approved Ex i I/O Module

According to ATEX and IECEx ..................................................................60

Table 31: Description of Marking Example According to NEC 500 .....................61

Table 32: Description of Marking Example for Approved Ex i I/O Module

According to NEC 505 ...............................................................................62

Table 33: Description of Marking Example for Approved Ex i I/O Modules

According to NEC 506 ...............................................................................62

Table 34: Description of Marking Example for Approved Ex i I/O Modules

According to CEC 18 attachment J ...........................................................63

Summary of Contents for 750-404/040-003







































































Search results

Summary of Contents for 750-404/040-003

Reviews:

Related manuals for 750-404/040-003

Brands by name

Popular brands

WAGO 750-404/040-003, Manual

Search results

Summary of Contents for 750-404/040-003

Reviews:

Related manuals for 750-404/040-003

Brands by name

Popular brands