WAGO 750-341, Manual

Page: 156 / 246

150 • EtherNet/IP (Ethernet/Industrial Protocol)
Object model
WAGO-I/O-SYSTEM 750
ETHERNET TCP/IP
4.3.3.2.3 Explanations of the Object Description
Attribute ID: Integer value which is assigned to the corresponded attribute
Access: Set The attribute can be accessed by means of Set_Attribute services.
Important: All the set attributes can also be accessed by means of
Get_Attribute services.
Get The attribute can be accessed by means of Get_Attribute services
NV: NV (non volatile) The attribute is permanently stored in the coupler.
V (volatile)
The attribute is not permanently stored in the coupler.
Note: If this column is missing, all attributes have the type V
Name:
Designation of the attribute
Data type: Designation of the CIP data type of the attribute
Description: Short description for the Attribute
Default value:
Factory settings
4.3.3.2.4 Identity (01
hex
)
Class
Attribute
ID
Access Name Data type Description
Default
value
1 Get Revision UINT Revision of this object 1 (0x0001)
2 Get Max Instance UINT Maximum Instance 0x0001
3 Get Max ID Number
of Class
Attributes UINT Maximum number of Class
attributes 0x0000
4 Get Max ID Number
of Instance
Attribute UINT Maximum number of instance
attributes 0x0000
Instance 1
Attribute
ID Access Name Data type Description Default value
1 Get Vendor ID UINT Manufacturer identification 40 (0x0028)
2 Get
Device Type UINT General type designation of
the product 12 (0x000C)
3 Get Product Code UINT Designation of the coupler e.g. 341 (0x0155)
Revision STRUCT of:
Major Revision USINT 4 Get
Minor Revision USINT
Revision of the Identity
Objects Depending on the
firmware