32
TwinControl
.
OPERATING MANUAL
EDITION 04/2010
PART NO. DOC393831
Software version: B3.30 and C3.30
P50
0-6
Display after stop is pressed:
0 = Mixing ratio (MV);
1 = Pot life only (P);
2 = Job sum (JS);
3 = MV and P alternating;
4 = MV and JS alternating;
5 = P and JS alternating;
6 = MV and P and JS alternating
adjustable
P51
0-999
DS/min
Maximal double stroke fl ush pump A per minute
adjustable
P52
0-999
DS/min
Maximal double stroke fl ush pump B per minute
adjustable
P53
Cycles
Number of A valve cycles resetable
Display
P54
Cycles
Number of A valve * 100000 cycles resetable
Display
P55
Cycles
Number of A valve cycles not resetable
Display
P56
Cycles
Number of A valve * 100000 cycles not resetable
Display
P57
Cycles
Number of B valve cycles resetable
Display
P58
Cycles
Number of B valve * 100000 cycles resetable
Display
P59
Cycles
Number of B valve cycles not resetable
Display
P60
Cycles
Number of B valve * 100000 cycles not resetable
Display
P61
0-99999
Number of A valve * 1000 cycles for service message
adjustable
P62
0-99999
Number of B valve * 1000 cycles for service message
adjustable
P63
0 or 1
0 = Shot Mode off
1 = Shot Mode on
adjustable
P64
0 or 1
0 = Normal Start
1 = If start is pressed more than 2 sec, fi lling separately A and B will
not be done
adjustable
P65
0 or 1
0 = No fl ushing after error message
1 = Flushing after error message
adjustable
P66
0 or 1
0 = Password for mixing ratio and Shot Mode quantity
1 = No password for mixing ratio and Shot Mode quantity
adjustable
P67
0 or 1
0 = Flow-rate monitoring off
1 = Flow-rate monitoring on
adjustable
P68
0-99999
cc/min
Minimum fl ow rate
adjustable
P69
0-99999
cc/min
Maximum fl ow rate
adjustable
P70
0.0-20.0 s
Delay time until alarm when fl ow is outside limit
adjustable
