63
VERSION 03/2018
ORDER NUMBER DOC 2369735
7.4.5 CLEANING OF THE NOZZLE PARTS
The nozzle parts (2, 3, 4, 5, 6, 8 and 9) may only be immersed into a cleaning solvent
recommended by the lacquer manufacturer and must be removed again immediately.
They may only remain in a cleaning solvent for a short time.
Clean these parts with a brush and dry them with a cloth or a blow gun.
7.4.6 STARTING UP THE VM 5020WA CONTROL UNIT
1. Turn switch to position 1.
AquaCoat
100
80
60
40
20
µA
80
60
40
20
10
kV
R3
R2
R1
POWER
0
1
POWER
B_03372
2. All LEDs on the control unit illuminate for approximately
1 second.
3. The hardware version and the software version are shown
on the display alternately in succession.
B_03373
Hardware version
Software version
4. After a few seconds, the control unit is ready for operation.
AquaCoat
100
80
60
40
20
µA
80
60
40
20
10
kV
R3
R2
R1
POWER
0
1
POWER
B_03374
Note:
Each starting sequence is concluded by allocating the
saved set data in recipe "R1".
