Wacom intuos 2 User Manual Download

Page: 96 / 165

CUSTOMIZING

Page 96

Contents

Index

CHECKING YOUR SERIAL TABLET CONNECTION

Select the C

ONNECTION

tab to check the status of your tablet connection to the serial port.

When checked, the tablet driver is on.

Displays all serial ports. The port in
use by the tablet is selected. Ports
used by other devices are dimmed.

Single tool mode at maximum data rate.
Required by some handwriting recognition
software.

Displays messages about your selected serial port.

•

ONNECTED

. The tablet is connected and responding correctly.

•

ESPONDING

. There is no communication between the tablet

and the computer.

•

VERRIDDEN

. Another application has taken over control of the

serial port.

•

RIVER

. The Intuos2 driver is turned off.

Recommended for graphics applications.

In S

INGLE

ODE

, the tablet will support only

one input tool. Do not place two tools on the
tablet at the same time.

Summary of Contents for intuos 2






































































































































































Search results

Summary of Contents for intuos 2

Reviews:

Related manuals for intuos 2

Brands by name

Popular brands

Wacom intuos 2, User Manual

Search results

Summary of Contents for intuos 2

Reviews:

Related manuals for intuos 2

Brands by name

Popular brands